yes good dating site cuba - Updating bios video cards

Since I already flashed my BIOS a long time ago when I got this video card, I will be backing up this BIOS and flashing my video card with this BIOS. Now it is time to back up the BIOS, in the C: ATIprompt I type in atiflash -s 0 backup1(always put a in the name otherwise you did not properly back up the BIOS). Remember to use the actual file name of the BIOS you’re using to upgrade to.I already did this once before, it does not hurt to have multiple backups of your BIOS. Tip: Manufacturer’s like to go a tad bit overboard on the naming of their BIOS’, for instance: 123456789iuyt.101 rename this file to something a lot easier like upgrade.101.

updating bios video cards-17

This guide is all about how to do that, and also recover from a bad video card flashing.

Unlike motherboards when you have a failed flash this normally renders that motherboard dead, or bricked.

Common Driver Sources Community Q&A Video card drivers are important for all computers because they tell the operating system (Windows 7) how to operate your video card.

Updating your video card drivers is sometimes required when one wants to run a game which demands a more up to date driver.

Do a couple of dry runs with your boot-able CD/DVD disk to make sure it is working properly prior to flashing..

Just in case things go south, as they do sometimes, we can recover with a BIOS that works. Make sure your USB flash drive was plugged in prior to booting into DOS.

Like always I or Bjorn3is not responsible for your actions regarding flashing the VGA BIOS. The codes or commands I will be using are: Backing up the BIOS:: -s 0 C:atiflash -s 0 Since I am using a USB flash drive and it is on a FAT 16/32 file system and my HDD’s are using a NTFS file system DOS only recognizes the USB flash drive as a HDD. The -s switch is telling Atiflash to save the BIOS to our HDD (USB flash drive). If you are using multiple video cards, and you want to flash or back up each one, you just change the 0 to the next corresponding VGA card. I have 2 5870’s one is in PCI-E 1, the second is in my second PCI-E port, the first video card uses the 0, the second uses a 1 switch. Also that your DOS CD/DVD disc is in the CD/DVD drive. (Reminder You cannot use a Blue Ray drive, DOS does not recognize this type of drive)Then we will see an A: prompt.

Any time you are flashing a VGA card, make sure you uninstall all drivers and overclocking utilities prior to flashing. As always once I boot off the CD/DVD DOS boot-able disk I am greeted with what do I wish to do. Oops, I must have turned on the floppy support in the BIOS of my motherboard, it should read C:.

It is not only us overclockers flashing our video card’s BIOS, this day and age just about everyone has, had to, or will need to flash the BIOS of their video card.

I have been tweaking the video cards BIOS for years now.

I have been using other manufacturer’s BIOS’, and then flash my video cards BIOS to get more overclockability.

Tags: , ,